Máy chà nhám HR-K2S2W1

Mô tả

Thông số kỹ thuật Máy chà nhám HR-K2S2W1

<SANDING HEAD UNIT>
The transmission of sanding head unit for this kind of machine adopt frequency converting speed, and the revolving speed can be regulated from 0 to 1800 RPM, according to hte different workpieces for processing. Every sanding head unit can be adjusted with great tilted angle to match with the shapes of the workpiece for processing.

<CUTTER HEAD UNIT>
The spindle can make reverse and positive cutting. While the cutter head has deviced with time control for auto in/out so as to prevent the end part of the timber being broken.

<SPONGE, BRUSH, SANDING WHEEL>
SPONGE WHEEL: To supplement for sanding and grinding of the plain and curved surface.
BRUSH WHEEL: To supplement for sanding and trimming.
SANDING WHEEL: To supplement for sanding of the sharp angle.

<PRESSING>
There are two kinds of press material: roller and belt type.
The roller type is most suitabley used for long and solid orkpieces.
The belt type is most suitably used for short and plywood orkpieces.

<WORKPIECE SUPPORT DEVICE>
Also, it has deviced with auxiliary wheel for delivery to extend the whole-row of wider workpieces for processing. The max. width of the workpiece is 1800mm.

Hình ảnh

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Máy chà nhám HR-K2S2W1”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Ngôn ngữ/Language